Sunday, January 22, 2017

"...Acute hydrogen cyanide poisoning can result from inhalation of fumes from burning polymer products that use nitrile in their production.." I heard that the fundamentalist muslim, wanted very much to manage to get something on board of airplanes, with clothing!!! either explosives...this is called Tabun...as a letal gas, it was used on the nazi concentration camps...

like I was saying polymers must have on their composition a litle bit of this

http://www.ebay.com/itm/10-Pairs-Premium-BLACK-Nitrile-Rubber-Coated-Palm-Work-Gloves-/171762992601

from inahalation, it kills on 2 minutes

NERVE GAS WARFARE HOW TO MAKE CHLORINE GAS

Safety Instructions + Theory
WARNING! Chlorine Gas is toxic and this experiment should be performed outside or under a fume hood. Please wear safety gear and stop the experiment once you smell the chlorine (should be after some seconds). Now a little theory (can be skipped if you like). Salt in Water dissolves into positive sodium ions and negative chlorine ions. With the electrolysis in this experiment we will obtain the chlorine gas as the chlorine ions are attracted to the positive electrode and leave one of their excess electrons, thus forming chlorine gas. On the negative side, hydrogen gas will form.
The Materials
Screen Shot 2015-06-03 at 17.53.51.png
Now you need to gather some easy-to-find materials.
  • A Cup
  • Water
  • Salt
  • Aluminium Foil
  • A carbon or graphite electrode (can be obtained from batteries or just use a pencil lead)
  • Wires
  • A 9 Volt Battery
  • (Duct) Tape
  • Breadboard (optional)
  • something to stir
  • safety gear

Dilute some salt in water. You can decide how much salt to use. I used 3-4 teaspoons of regular Sodium chloride salt on 100 ml of water.

Prepare the electrodes
Wrap a wire around the carbon electrode and fix it with tape. Repeat the process with the aluminium foil.

Connecting - Producing Chlorine Gas

Connecting - Producing Chlorine Gas
Screen Shot 2015-06-03 at 17.55.31.png

Put both electrodes in the cup filled with the saltwater. Now connect the positive side of the battery with the carbon electrode and the negative side with the aluminium foil. For ease of use you may use a breadboard. Once connected to the power outlet bubbles will start to form. The ones on the carbon electrode are chlorine gas bubbles. Soon you should be able to smell the chlorine. Stop the experiment then and do not leave it unattended, as chlorine is toxic. I am not responsible for any damage caused by the recreation of this instructable



Planet Cortex (Eter9 Social Network ) AI intel portuguese eng

  https://www.eter9.com/